How To Use Your CassCaps 2.0

WARNING:  This item is not a toy. Keep out of reach of small children. This item contains small and moving parts that could be a choking and / or pinching hazard. Inspect glass jars for cracks or imperfections. Broken glass can cause injury.  

SETTING UP YOUR CASSCAPS™: 

  1. Wash and dry thoroughly cap, jar, and funnel (Refer to washing instructions). Be sure to put the silicone washer back in the underside of your cap if it was removed or came out when washing your cap. It is necessary for proper function.
  2. Transfer your ingredients using our quick transfer funnel included with your kit.
  3. Screw your CassCaps fully onto the jar until firmly secure but do not overtighten.
  4. Place the desired round ingredient label on the jar about midway up vertically. Use black rectangular labels on the top of your jar if you can only see your jars in a rack or drawer from the top.
  5. Use a permanent ink marker for blank labels if needed. 

HOW TO USE YOUR CASSCAPS™ MEASURING CAPS:

You can use your CassCaps to measure in ¼ tsp increments or to “sprinkle to taste” straight from the bottle. NOTE: The sprinkle slide must be closed when measuring (Fig.1).

TO MEASURE: 

  1. Close sprinkle slide if open (Fig. 1).
  2. Flip your CassCaps jar & measuring cap upside down (Fig. 2)
  3. Twist the bottle clockwise and / or the CassCaps cap counterclockwise until it reaches the built-in stop point, holding the cap with one hand and the bottle in the other (Fig. 3).
  4. Release. The bottle (or cap) should spring back to the home position on its own.
  5. Repeat steps 1-3  as needed until the desired measurement is obtained. See the “Measuring Conversions” below for more details.

MEASURING CONVERSIONS*: 

 

* In Australia, 4 teaspoons = 1 Tablespoon. Adjust accordingly.

TO SPRINKLE INGREDIENTS: 

  1. Slide the sprinkle tab (Fig. 4) clockwise to the open position.
  2. Shake lightly at first to determine sprinkle flow, adjusting the vigor of shake and / or the angle with which you hold the jar according to desired flow. Generally, you will find the best result for granules and powders by holding your jar at a slight angle and shaking from side to side, whereas larger flaky ingredients may need to be shaken up and down (Fig. 5 and Fig. 6).
  3. Always close the sprinkle slide (Fig. 4) after using this functionality.

If you have any questions, please email us at  info@casscaps.com.